Koswork Adjustable Ride Height Gauge — Stop Guessing, Start Measuring
Share
Available now at Nick Hobbies USA | Ships fast from our US warehouse
If your RC car setup changes from run to run and you cannot figure out why, ride height is usually the first place to look. A millimeter off front or rear can affect steering response, jump attitude, and corner stability — and if you are measuring by eye or with a basic stepped block, you are probably not getting consistent numbers.
The Koswork Adjustable Ride Height Gauge solves that. It is one of the most practical tools in the pit box for any racer who wants repeatable setup data instead of approximations.
What Makes the Koswork Adjustable Ride Height Gauge Different
Most ride height gauges are fixed-step tools. You get two or three preset heights, and if your target falls between them, you are stuck estimating. The Koswork adjustable gauge works differently.
The gauge is made from high quality aluminum and twists to your exact target height in 1mm increments. The range covers 12~17mm out of the box, and a magnetic 5mm block is included to extend the range to 17~22mm. The scale is laser-engraved for easy reading, and the tool is compact and lightweight — built to live in a race bag without adding bulk. Koswork R/C Model
That twist-to-set design means you dial in the exact number you want, place the gauge under the chassis, and get a clear pass or fail reading in seconds. No guessing between steps. No switching between multiple fixed blocks for different classes.
Which Version Do You Need?
Koswork makes the adjustable ride height gauge in several versions to cover different platforms:
| Model | Range | Best For |
|---|---|---|
| KOS13361 | 12~22mm (w/ 5mm block) | 1/10 Buggy |
| KOS13366 | 22~32mm | 1/8 Buggy & 1/10 Truck |
| KOS13367 | 22~42mm (w/ 10mm block) | 1/8 Truggy & Buggy |
| KOS13351 | 3.0~8.5mm | 1/12 & 1/10 On Road |
If you run Kyosho, Team Associated, or Tekno buggies, the KOS13361 is the most common starting point. If you run 1/8 off-road, look at the KOS13366 or KOS13367 depending on your typical ride height range.
Why Serious Racers Use It
A quality ride height gauge earns its place in the pit box because it removes variables. After a crash, you can verify the car is still square. After rebuilding shocks or changing springs, you can confirm you are back to baseline. After a track surface change mid-day, you can make a quick adjustment and know exactly where the car sits.
The Koswork adjustable gauge is particularly useful for racers who run multiple cars or classes, because you are not swapping between different fixed-step blocks every time the setup sheet changes. Dial the gauge, check the car, move on.
Available Now at Nick Hobbies USA
Nick Hobbies USA is an official authorized Koswork distributor in the United States. All Koswork setup tools ship directly from our US warehouse — no overseas delays, no customs fees, USD pricing.
👉 Shop Koswork Setup Tools 👉 Shop Koswork 1/12 & 1/10 On Road Ride Height Gauge KOS13351
Need a specific model or have a question about which gauge fits your platform? Contact us at nickhobbiesusa@gmail.com — we are here to help.